EAP WAP Setting

Wireless Advanced Settings

  • Beacon Interval (milliseconds) WiFi routers use these “beacon” signals to help keep the network synchronized and many default to 100ms. Setting a lower (e.g. 50 or 75ms) interval might help your WiFi network to hold its connection with other devices, albeit at a cost to some battery life on other devices. By contrast raising the setting above 100ms could save power but the likelihood of connectivity problems may increase.
  • RTS Threshold (Request To Send) The RTS Threshold protocol is a tricky one to explain, but it helps to clear the channel before data is sent. A lower setting may help in busy WiFi environments as it should reduce collisions, but set it too low or incorrectly and your network performance may suffer. It’s a tricky balancing act to get right.
  • Fragmentation Threshold Any data packets larger than the size programmed in this field will be fragmented. Setting smaller packets than the default can improve reliability, especially in busy environments, albeit at the cost of performance. Again, we wouldn’t touch this or the RTS threshold unless you’re comfortable with making such tweaks and always make a note of your settings so you can swap them back if it doesn’t work.